Archive for September, 2009

EDO Sponsor car – WORKS’s Ralliart on Octane Report

Monday, September 14th, 2009

The Octane Report published an article about WORKS’s 2009 Lancer Ralliart R-444, one of the EDO Performance sponsor car. This car has recently participated in BFGoodrich KDW Challenge in Las Vegas. This rally car is equipped with engine (nearly stock) that has been modified with a straight pipe custom exhaust, pushing only about 260 HP & 308 lb/ft of torque; Samco hoses, WORKS P2 Brain Flash ECU and air restrictor. It’s WORKS latest project to prepare for Rally America Competition. Check out the site below for detail article report.

 

http://octanereport.com/news/334/15/WORKS-Lancer-Ralliart-Rallycar.html

 

EDO Sponsors WORKS EVO & Ralliart on KDW Shotgun Challenge!

Monday, September 14th, 2009

In the month of July, EDO Performance sponsored WORKS on the BF Goodrich KDW Shotgun Challenge at Las Vegas Motor Speedway on July 12, 2009. This event is to showcase BF Goodrich® g-Force™ T/A® KDW tires, where the tires fitted to 10 different high performance cars to perform mix of Drift, Road Racing, Endurance Racing, Time Attack, Rally, and Street cars. 25 lucky consumers were chosen to ride on the performance cars and experience the capabilities of the tires. You can go to www.kdwchallenge.com/#/gallery to see each passenger’s emotion recorded on video cam.

EDO sponsored cars – WORKS 2008 EVO X and 2009 Lancer Ralliart were chosen to perform in this event. Here’re the specifications:

1. WORKS 2008 EVO X TR-444

This car will be participated in United States Rally Championship at the Gorman Ridge Rally on August 14-15. The car will also be campaigned in the 2010 season of the Rally America series.

Specification
•   WORKS “FlashWORKS T1”- ECU Flash w/Boost Control
•   WORKS/Garrett Turbo Kit- Garrett GT3076R series
•   Cosworth MX1 Cams
•   WORKS Drop-in High-Flow Air Filter
•   WORKS Evo X Diverter Valve
•   WORKS Turbo-back exhaust with Rally pipe (prototype)

Drivetrain
•   WORKS CK2 Carbon/Kevlar Clutch Kit
•   WORKS Spin Aluminum Lightweight Flywheel
•   WORKS Throw Short Shifter
•   WORKS Shifter Console Bushings
•   WORKS Hybrid Shifter Cable Bushings
•   WORKS Grab Shift Knob

Exterior
•   SEIBON Carbon Fiber Front & Rear Doors
•   SEIBON Carbon Fiber Hood & Trunk
•   SEIBON Carbon Fiber Wide Fenders
•   SEIBON Carbon Fiber VR Style Front Lip
•   SEIBON Carbon Fiber Rear Wing
Suspension / Wheels
•   WORKS Adjustable Front (hollow) and Rear (solid) Sway Bars
•   AST 5300 series adjustable coilovers
•   Vorshlag Front camber plates
•   WORKS Racing lug nuts
•   AME FS-01 18×9″ Wheel
•   BF Goodrich G-Force T/A KDW 255/35ZR18

Brakes
•   WORKS Stainless Steel Brake Line Kit
•   WORKS Orange Brake Pads front and rear
•   Endless RF-650 Brake Fluid

Accessories
•   Defi Link Meter Boost Gauge Imperial
•   AutoPower Roll Cage

2. WORKS 2009 Lancer Ralliart R-444

Specification:
•   Engine: Mitsubishi 4B11T motor
•   WORKS High Flow Air Filter
•   WORKS Cold Air Intake
•   WORKS P2 ECU Flash (with anti-lag)
•   WORKS Ralliart Diverter Valve
•   3″ straight pipe exhaust
•   EVO X turbo/piping/intercooler
•   Royal Purple racing oil

Transmission
•   Mishimoto Transmission Cooler

Suspension/Wheels
•   Hot Bits Rally Suspension
•   AME TM-02 – 17×8
•   BF Goodrich KDW tires – 225/45/zr17

Brakes
•   WORKS Teflon-Kevlar-Stainless Steel Line Kit
•   Front Endless Brake Pads

Exterior
•   Evo X Rear Wing
•   Graphics by LAB17

Interior
•   Custom light weight dash
•   Custom WORKS  Roll cage built to Rally America specs
•   Sparco Seats
•   6 Point Harness

•   WORKS Grab Shift Knob